
Positioning
The adjacent furniture must be able to withstand a
minimum temperature rise of 85°C above the ambient
temperature of the room it is located in, during
periods of use.
o This appliance can be located in a kitchen, a kitchen diner or a
bed sitting room. IMPORTANT: The appliance must not be
installed in a bathroom or shower room.
This appliance is classified as Class 3 and therefore is to be built into a
kitchen unit (depending on size) or 600mm worktop, providing the
following minimum distances are allowed:
o 55 mm from the rear edge of the hob to the wall behind.
o 100 mm from the side edges of the hob and any adjacent walls
or cabinets.
o 700 mm between the highest point of the hob surface (including
the burners) and the underside of any horizontal surface directly
above it.
o 400 mm between the hob surface, providing that the underside
of the horizontal surface is in line with the outer edge of the hob.
If the underside of the horizontal surface is lower than 400 mm,
then it must be at least 50 mm away from the outer edges of
the hob.
14
Komentarze do niniejszej Instrukcji