Baumatic BHG602TCSS Instrukcja Użytkownika

1BHG602SS 4 burner gas hob. BHG602TCSS 4 burner gas hob with thermocouples.

Using the gas hob Before first use IMPORTANT: You should clean the hob surface (see “Cleaning and maintenance” section). Turning the hob on The fo

Turning the hob on (BHG602TCSS) o This particular appliance is fitted with a thermocouple safety device on each burner, which is designed to stop th

IMPORTANT: Always place pans centrally over the hob burners and position them so that the handles cannot get accidentally caught or knocked off. You s

o Soak them for about ten minutes in hot water and a little detergent. o After cleaning and washing them, wipe and dry them carefully. o Before

Positioning The adjacent furniture must be able to withstand a minimum temperature rise of 85°C above the ambient temperature of the room it is locat

Unpacking the appliance When unpacking the appliance please check that the following items are contained within the packaging: 1 x Baumatic hob 2 x

o Carefully turn the hob upside down and place it on a cushioned mat. o Apply the sealing strip (A) provided around the edge of the appli

o Place the clamp (B) over the holes that match the size of the screws. There are one set of screw holes in each corner of the hob. Slightly tighten

18Ventilation requirements o The room containing the cooker should have an air supply in accordance with the current edition of BS 5440: Part 2:

Gas Safety (Installation and Use) Regulations IMPORTANT: The appliance MUST be connected to the gas supply by use of a 15 mm x ½” female coupler, sea

User Manual for your Baumatic BHG602SS 4 burner gas hob. BHG602TCSS 4 burner gas hob with thermocouples. NOTE: This User Instructi

Gas adjustment (Conversion to LPG) All work must be carried out by a CORGI registered engineer. IMPORTANT: Always isolate the cooker from the electr

Minimum flow adjustment for hob gas taps. All work must be carried out by a CORGI registered engineer. IMPORTANT: Always isolate the hob from the e

Gas tap maintenance These maintenance operations MUST ONLY be carried out by a CORGI registered engineer. IMPORTANT: Before carrying out any mainten

Electrical connection This appliance must be installed by a qualified person in accordance with the latest edition of the I.E.E. Regulations and in c

My appliance isn’t working correctly IMPORTANT: If your appliance appears not to be operating correctly, then you should disconnect it from your main

Czech Republic United Kingdom Baumatic CR spol s.r.o. Baumatic Ltd., Amperova 495 Baumatic Buildings, 46215, Librec 6 Bennet Road, Czech Republi

26

27

28

3Contents Environmental note 4 Important safety information 5 – 7 Specifications 8 Product & Aperture dimensions 8 Produc

Environmental note 4 o The packaging materials that Baumatic uses are environmentally friendly and can be recycled. all packaging mat

5Important safety information Your safety is of the utmost importance to Baumatic. Please make sure that you read this instruction booklet before at

6hild Safety d ny time. During and after use, all surfaces will become hot. se ensure that they are kept under close supervision at all times. ld onl

o Great care should be taken whilst using this appliance and when following the cleaning procedure. o You should not use a steam jet or any other h

Specifications Product dimensions: Aperture dimensions: Height: 510 mm Height: 480 mm Width: 595 mm Width: 560 mm Depth: 35 mm

Gas details Connection: Rp ½ (ISO R7), the gasket is not required Type: Natural Gas (20mbar), Alternative LPG G30(28-30/37 mbar) to order. Gas