Baumatic PI645 Instrukcja Użytkownika Pobierz pdf (Strona 22)

Positioning

The adjacent furniture must be able to withstand a

minimum temperature rise of 85°C above the ambient

temperature of the room it is located in, during

periods of use.

This appliance is classified as Class 3 and therefore is to be built into a

kitchen unit (depending on size) or 600 mm worktop that is between

25 mm and 40 mm thick. The following minimum clearance distances

must be observed:-

o 700 mm between the hob surface and the underside of any

horizontal surface above it.

o 50 mm clearance around the sides and front of the appliance.

o 55 mm clearance between the back of the hob surface and the

wall behind it.

o If the hob is positioned so that the right or left hand side of the

appliance will be near to the edge of a kitchen unit. There must

be a gap of at least 150 mm between the side of the hob and the

vertical surface of the kitchen unit.

o IMPORTANT: Underneath the appliance there must be a

partition made of insulating material (e.g. wood). There must be

a gap of at least 50 mm between the underneath of the

appliance and this partition.

o You must make sure that there is a 5mm gap below the

underneath of the worktop at the front edge of the hob.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 35 36

Brak uwag

Baumatic PI645 Instrukcja Użytkownika Strona 22