Baumatic BH755TCSS Instrukcja Użytkownika Pobierz pdf (Strona 15)

Automatic ignition with flame failure safety device

The appliance is fitted with a flame failure safety device on each

burner, which is designed to stop the flow of gas to the burner head in

the event of the flame going out.

To ignite a burner:

o Press in the control knob of the burner that you wish to light and

turn it anti-clockwise to the maximum position.

o If you keep the control knob depressed, the automatic ignition

for the burner will operate.

o You should hold down the control knob for 20 seconds after the

flame on the burner has lit.

o After this 20 second interval, to regulate the flame you should

continue turning the control knob anti-clockwise until the flame

is at a suitable level. The operating position MUST be at a

position between the maximum and minimum position.

o To switch the burner off, turn the control knob fully clockwise to

the gas off position.

o In case of power failure, the burners can be lit by carefully using

a match.

Energy saving tips

Pan size Burners

Ø min Ø max

Wok 220 mm

260 mm

Rapid 180 mm

220 mm

Semi-rapid

120 mm

200 mm

Auxiliary 80 mm 160 mm

o The diametre of the bottom of the pan should correspond to that

of the burner.

o The burner flame must never extend beyond the diametre of the

pan.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 31 32

Brak uwag

Baumatic BH755TCSS Instrukcja Użytkownika Strona 15