Baumatic BFI40SS Instrukcja Użytkownika Pobierz pdf (Strona 15)

Cookware that is suitable for an induction hob

The table below shows cookware that is normally suitable for use on

an induction zone hob:-

Cookware Suitable

Steel, enamelled steel Yes

Cast iron Yes

Stainless steel Yes (if stated by the pan

manufacturer)

Aluminium, copper, brass No

Glass, ceramic, porcelain No

o The bottom of the pans should be as flat and thick as possible.

o Certain types of cookware may result in a noise being made

when being used on an induction zone hob. This does not mean

that there is an appliance fault.

o IMPORTANT: You should make sure that all pans are placed in

the centre of the induction zone that you are using.

Protection against accidental operation of the hob

If when the hob is switched on, the electronic control senses a

continuous operation of any hob button for approximately 10 seconds,

it will switch the appliance off automatically.

o If this occurs, then there will be an audible signal that lasts for

10 seconds and “ER03” will appear on the display.

o If a pan or some other object has been accidentally placed onto

the control panel, then it should be removed.

o After 10 seconds, the audible signal will cease but “ER03” will

remain on the display until the object is removed from the

control panel.

o If any of the hob zones are still hot, then the “ER03” code will

alternate with the letter “H”.

o If the appliance is switched on using the ON/OFF button (1) and

no cooking zone is activated. After 20 seconds the hob will

switch itself off automatically.

o If an object is accidentally placed on the control panel when the

hob is not switched on, it will not be possible to switch the

appliance on using the ON/OFF button (1) until you remove the

object from the control panel.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 35 36

Brak uwag

Baumatic BFI40SS Instrukcja Użytkownika Strona 15