avecf BHC607/SS 60 cm Front touch control ceramic hob
10For future reference please record the following information which can be found on the rating plate and the date of purchase which can be found on
11Control panel layout 1. Safety lock button 2. Cooking zone indicator 3. Cooking zone minus button (x 4) 4. Cooking zone plus button (x 4) 5.
12Touch controls o All operations are performed by means of the touch controls that can be found on the control panel. o Each touch control has
13Switching on a cooking zone and setting a power level IMPORTANT: A cooking zone must be selected within 1 minute of switching the hob on. o Pr
14Switching on a dual circuit cooking zone The dual circuit cooking zones have two cooking areas that you can use, a central section and an o
15Locking the hob top o The whole hob top can be locked by pressing the safety lock button (1) whilst the appliance is turned on. o The timer di
16The hob timer (countdown mode) Your hob has a timer which will countdown a period of time between 1 and 99 minutes. At the end of
17The hob timer (linked to a cooking zone mode) o Press the ON/OFF button (9) o The cooking zone indicators (2) will all read “-”. o Press the
18o You should not use saucepans with rough bottoms, as this can scratch the ceramic surface. o Before use, make sure that the bottoms of the sauc
19Cleaning and maintenance Cleaning operations must only be carried out when the hob is cool. The appliance should be disconnected from your mains
2User Manual for your Baumatic BHC607/SS 60 cm Front touch control 4 hyperspeed zone ceramic hob NOTE: This User In
20Using a ceramic hob scraper Your appliance will be provided with a hob scraper. The following guidelines should also be followed when using the ce
21Positioning The adjacent furniture must be able to withstand a minimum temperature rise of 85°C above the ambient temperature of the room it is lo
22Installing the appliance BHC607 BHC607SS o Cut a hole in the worktop that corresponds with the relevant drawing shown above.
23 o IMPORTANT: You must observe the ventilation requirements shown in the drawing opposite. o IMPORTANT: There are ventilation holes
24 o You should place the bracket on the underneath of the hob, in a position that is appropriate for the aperture that you have cut out. Using the
25Connecting the mains supply cable o The mains terminal block is located on the underside of the hob and the terminals are acce
26o The cable connections must be in accordance with the diagram located on the bottom of the hob (see above). o You should use a good quality scr
27My appliance isn’t working correctly o The cooking zones are not functioning or will not switch on. * It has been more than 1 minute since the
28 IMPORTANT: If your appliance appears not to be operating correctly, then you should disconnect it from your mains supply and then contact Baumatic
29 United Kingdom Baumatic Ltd., Baumatic Buildings, 6 Bennet Road, Reading, Berkshire RG2 0QX United Kingdom Sales Telephone (0118) 933 6900 Sales
3Contents Environmental note 4 Important safety information 5 – 8 Specifications 8 – 10 Product and aperture dimensions 8 P
30
31
32
4Environmental note o The packaging materials that Baumatic uses are environmentally friendly and can be recycled. o Please discard
5Important safety information Your safety is of the utmost importance to Baumatic. Please make sure that you read this instruction booklet before at
6Child Safety o Baumatic strongly recommend that babies and young children are prevented from being near to the appliance and not allowed to touch
7Cleaning o Cleaning of the hob should be carried out on a regular basis. o IMPORTANT: Before attempting to clean the appliance, it should be di
8o Pans should be lifted on and off the hob surface and not dragged. o Cooking zones should not be switched on without cookware placed on it. Also
9BHC607SS Product dimensions Depth: 524 mm Width: 594 mm Height: 55 mm Aperture dimensions Depth: 495 mm Width: 565 mm Pr
Komentarze do niniejszej Instrukcji